bebon steel

Tel:0086-0371-86151827

E-mail:[email protected]
Contact us
Products
You are here : 首页 > News

15CrMoR (H) Medium temperature pressure vessel steel plate

15CrMoR (H) Medium temperature pressure vessel steel plate

The technical conditions apply to plates of 15CrMoR (H) with thickness not more than 200mm. (8mm-200mm)

Adopt standard: WYJ005-2003 Standard Specification covers chromium-molybdenum alloy steel plates intended primarily for welded boilers and pressure vessels designed in H2 service. The dimension, shape, weight and permissible deviation shall meet the requirements of GB6654 & GB222.

15CrMoR (H) steel plate Thickness tolerance: +/-1.52mm
Flatness: 4mm/m
Surface shot blasting or peeled.

Ultrasonic inspection Plates shall be 100% ultrasonic inspected as per SA578 / SA577 / SA435.

Test method and inspection rules Test items, sampling quantity, sampling method and test method shall conform to table 4. Table 4 Test items for plates Package, marking and certificate Package, marking and certificate shall conform to ASME SA20/SA20M.

Delivery conditions The delivery conditions for plates of 15CrMoR (H) shall be N+T. Other requirements: The other requirements for plates of 15CrMoR (H) shall be in accordance with SA387 & WYJ005-2003. MTC in accordance with EN10204: 2004 3.1 Parameter

15CrMoR (H) steel plate Chemical composition (Ladle analysis) % Max

C

Si

Mn

P

S

Cu

Cr

Ni

Mo

0.12-0.18

0.15-0.4

0.4-0.7

0.012

0.01

0.20

0.80-1.20

0.20

0.45-0.60

15CrMoR (H) steel plate Mechanical properties:

Size mm

Mechanical properties

Lateral expansion
mm

Hardness test1/4 T
HB

Yield strength MPa

Tensile strength MPa

Section shrinkage ratio %

Elongation %

T≤200

Min 295

450-690

Min 45

Min 19

Min

Max

15CrMoR (H) steel plate Impact properties:


Charpy-V Impact Test temp.
Celsius degree

Transverse 1/4 Thickness

Longitudinal 1/4 Thickness

Average impact energy

Average impact energy

0℃

Min 60 J

Min

15CrMoR (H) steel plate Grain size:

No.

Test item

Quantity, Piece

Direction

Test method

1

Heat analysis

1 per heat

ASME SA751

2

Product analysis

1 per batch

ASME SA751

3

Tensile test at Ambient Tem

1 per batch

Transverse

ASME SA370

4

Bend Test

5

Charpy-V impact

6

Grain size