Contact us
- : 0086-371-86151627 0086-371-86151827
- : 0086-371-86011881
- : [email protected]
- : [email protected]
- : bebonchina
Products- Boiler steels
- High carbon steel
- High Yield steel
- steel for welded tubes
- General construction steel
- steel with Cr.,Mo.,Cr-Mo
- Steel for large diameter pipes
- Simple pressure vessels steel
- Steel for gas cylinders and gas vessels
- General purpose structural steels
- Steel for boilers and pressure vessels
- steel resistant to atmospherical corrosion
- Carbon steel and low alloy steel
- Fine-grain structural steels,normalised rolled
- weldable normalized fine grained pressure vessel steels
News- Rolling points of HP265 Steel
- Causes of Wrinkles on the Surface of
- Advantages of Controlled Rolling for
- The difference between A283 Gr C and
- Quality inspection of plate A285 gra
- A285 Gr.C plate for storage tanks
- The processing Technology of NM400 S
- Possible defects of 16Mo3 steel plat
- Acceptance criteria of Surface for 1
- Heat Treatment and Applications of A
16Mo3 1.5415 pressure vessels steel plate
16Mo3 1.5415 pressure vessels steel plate
16Mo3, designated with steel number 1.5415, is an European (DIN EN) steel grade for alloy steels. The 16Mo3 material can be furnished in different product forms in accordance with relative EN standards. Generally speaking, 16Mo3 is a Cr-Mo alloy steel. The addition of molybdenum (Mo) not only improves the resistance to pitting corrosion but also significantly enhances creep strength at elevated temperatures. The chromium (Cr) improves the resistance to high-temperature hydrogen attack and graphitization.
Mechanical Property for 16Mo3 steel:
|
Grade/test |
16Mo3 |
|
Tensile Strength (MPa) |
440 – 590 |
|
Yield Strength (MPa) |
220 – 275 |
|
Elongation in 100 – 150mm (%) |
19 |
|
Elongation in 16mm (%) |
24 |
|
Max Thickness (mm) |
250 |
Chemical Properties for 16Mo3 steel:
|
Elements |
Composition (%) |
|
Carbon (C) (Max) |
0.12 – 0.2 |
|
Manganese (Mn) |
0.4 – 0.9 |
|
Silicon (Si) |
0.35 |
|
Phosphorous (P) |
0.025 |
|
Sulphur (S) |
0.01 |
|
Chromium (Cr) |
0.3 |
|
Molybdenum |
0.25 – 0.35 |
| Nickel (Ni)
|
0.3 |
|
Copper (Cu) |
0.3 |
|
Nitrogen (N) |
0.0120 |
16Mo3 Steel for is used for boilers and pressure vessels with elevated temperatures according to EN 10028–2 (2003). It is equivalent to 15Mo3 (DIN 17155 – Germany), 15D3 (NFA 36–205 – France), BS1501–243b (BS1501 – UK) and ASTM 204 Gr.B.