- : 0086-371-86151627 0086-371-86151827
- : 0086-371-86011881
- : [email protected]
- : [email protected]
- : bebonchina
- Boiler steels
- High carbon steel
- High Yield steel
- steel for welded tubes
- General construction steel
- steel with Cr.,Mo.,Cr-Mo
- Steel for large diameter pipes
- Simple pressure vessels steel
- Steel for gas cylinders and gas vessels
- General purpose structural steels
- Steel for boilers and pressure vessels
- steel resistant to atmospherical corrosion
- Carbon steel and low alloy steel
- Fine-grain structural steels,normalised rolled
- weldable normalized fine grained pressure vessel steels
- Rolling points of HP265 Steel
- Causes of Wrinkles on the Surface of
- Advantages of Controlled Rolling for
- The difference between A283 Gr C and
- Quality inspection of plate A285 gra
- A285 Gr.C plate for storage tanks
- The processing Technology of NM400 S
- Possible defects of 16Mo3 steel plat
- Acceptance criteria of Surface for 1
- Heat Treatment and Applications of A
ASTM A285 Grade C Carbon Steel plate
ASTM A285 Grade C Carbon Steel plate
ASTM A285 Grade C steel type also has good formability and weld-ability.
We products these ASTM A 285 Grade C products that are effective at low pressure conditions, but can also be used in a variety of conditions.
These products have intermediate to low yield strength. These properties make it usable in in structural, mechanical and other engineering purposes.
A285 grade C Chemical Composition:
Grade |
The Element Max (%) |
||||
C |
Si |
Mn |
P |
S |
|
A285 grade C |
0.28 |
0.08-0.45 |
0.98 |
0.035 |
0.035 |
Carbon Equivalent: Ceq = 【C+Mn/6+(Cr+Mo+V)/5+(Ni+Cu)/15】%
A285 grade C Mechanical Property:
Grade |
Thickness |
Yield |
Tensile |
Elongation |
A285 grade C |
mm |
Min Mpa |
Mpa |
Min % |
6-50 |
205 |
380-515 |
27% |
|
50-200 |
205 |
380-515 |
23% |
ASTM A285 Grade C steel type is commonly used in standard Tanks and Boilers. Our ASTM A 285 Grade C steel is also used in the fabrication of Carbon steel pressure vessels.