S355N is a European standard hot-rolled structural steel product, and other materials of the same series are S355J0, S355K2, S355J2, etc.Chemical composition of
Q355NHB grade introduction
Q355NHB is a weathering steel plate and also belongs to the low alloy series steel.
The letter Q is the first letter of the yield
The
Pipeline steel refers to the steel with special requirements for the transportation of oil and natural gas pipelines.Among the API 5L GrB steel plates: Grade B
Introduction of SA283 GrC carbon steel:
SA283 GrC belongs to medium and low strength carbon steel plate.Delivery status of SA283 GrC steel:
Delivery status of S
SA516 Gr70N steel plate meets the requirements of (ASME) ASTMA516/A516M specification, and fully meets the needs of oil and gas with high content of sulfur and
SA516 Gr415 plate is an American standard pressure vessel steel plate, material name: carbon steel plate for medium and low temperature pressure vessels.Tradema
35# steel is the name in the national standard. The ASTM standard is called 1035, the BS standard is called 060A35, the JIS standard is called S35C, the NF stan
10# is No. 10 steel. 10# steel is one of the high-quality carbon steels with an average carbon content of 10%. Its plasticity, toughness, elongation and weldabi
Introduction of S355J2 low alloy steel: S355J2 is a grade of European standard equivalent to Q345D of national standard. It is a low-alloy high-strength structu
S500Q steel plate is a high-strength structural steel of German standard. It is usually called high-strength plate in China. Its composition and performance are
S355J0W, S355J2W, S355k2W are corrosion-resistant steel plates. Implement EN10025 standard. A certain amount of alloying elements, such as P, Cu, Cr, Ni, Mo, ar
A573 Gr70 is the American standard container steel plate, which implements the ASTM standard. A573 Gr70 vessel plate is commonly used in the manufacture of equi
20CrMo steel plate is an alloy structural steel plate, which is used to make all kinds of alloy structural steel and its components, such as the header of the s
SA662 GrC boiler vessel plate is an American standard container plate, which implements the ASME standard. It belongs to the C-Mn steel plate for pressure vesse
20MnMoR is a steel plate for boilers and pressure vessels, which is used to manufacture pressure vessels for petrochemical, gas separation and gas storage and t
S355J2 introduction: S355J2 is a European standard steel, equivalent to the grade Q345D. It is a low-alloy high-strength structural steel. Because of its good i
H13 die steel delivery status and mechanical propertiesH13 belongs to hot work die steel, which is formed by adding alloying elements on the basis of carbon ste
Characteristics of 35# high-quality carbon steel: No. 35 high-quality carbon structural steel (GB/T699) has good plasticity and appropriate strength, good proce
Q390B/Q390C/Q390D are low-alloy high-strength steel plates, the difference lies in the impact temperature of the steel plates. The similarities between Q390B an
SN490B and SN490C are steel plates for construction. It is a special steel for earthquake-resistant buildings. Corresponds to the Q490C steel plate in Chinese s
Q460GJC-Z35/Q460GJD-Z35 steel plates are mainly used in the construction of high-rise and important building structures. They are required to have high impact t
12Cr1MoV alloy steel plate has high oxidation resistance and thermal strength. The creep limit of this steel is very close to the permanent strength value, and
In the hot-rolled steel plate, the mechanical properties of the steel plate in the rolling direction and the transverse direction are different, which is mainly
There is a certain difference in the mechanical energy of steel plate (especially thick plate) in three directions, which is due to the deformation of metal dur
Q390ME material description: Q390ME steel plate is a low-alloy high-strength steel plate in the state of thermomechanical rolling. Implement GB/T 1591 standard.
Contact us