Contact us
- : 0086-371-86151627 0086-371-86151827
- : 0086-371-86011881
- : [email protected]
- : [email protected]
- : bebonchina
Products- Boiler steels
- High carbon steel
- High Yield steel
- steel for welded tubes
- General construction steel
- steel with Cr.,Mo.,Cr-Mo
- Steel for large diameter pipes
- Simple pressure vessels steel
- Steel for gas cylinders and gas vessels
- General purpose structural steels
- Steel for boilers and pressure vessels
- steel resistant to atmospherical corrosion
- Carbon steel and low alloy steel
- Fine-grain structural steels,normalised rolled
- weldable normalized fine grained pressure vessel steels
News- Paper Machine Thick Steel Plates for
- Sugar Mill Thick Steel Plates for Pr
- Tunnel Boring Machine Thick Steel Pl
- Railway Bogie Thick Steel Plates for
- Thick Steel Plates in Large Hydrauli
- Thick Steel Plates for Large Bulk Ma
- Heavy Machine-Bed Thick Steel Plates
- Penstock Thick Steel Plates for Hydr
- FPSO Hull Thick Steel Plates for Flo
- Building-Structural Thick Steel Plat
Buy JIS SMA400AW Atmospheric Corrosion Resistant Steel from China
Buy JIS SMA400AW Atmospheric Corrosion Resistant Steel from China

Introduction JIS SMA400AW Steel:
SMA400AW resists the corrosive effects of rain, snow, ice, fog, and other meteorological conditions. The surface of the metal SMA490AW can form a coating of dark brown oxidation, which inhibits deeper penetration, so SMA490AW steel saves the cost of need for painting and costly rust-prevention maintenance over the years.
Delivery Condition of SMA400AW can be Hot Rolled, Cold Rolled, Normalized, Quenched, Tempering, thermal.
Key words: SMA400AW, JIS G3114 SMA400AW hot rolled steel, JIS G3114 SMA400AW steel plate/sheet/bar/section steel. JIS G3114 SMA400AW Corten steel, SMA400AW Weathering steel, SMA400AW Weathering resistant steel, SMA400AW atmosphere corrosion resistance steel.
JIS SMA400AW Chemical Composition:
|
Grade |
C ≤ |
Si |
Mn ≤ |
P ≤ |
S ≤ |
Cu |
Cr |
Ni |
Ce ≤ |
|
SMA400AW |
0.18 |
0.15~0.65 |
1.25 |
0.035 |
0.035 |
0.30~0.50 |
0.45~0.75 |
0.05~0.30 |
- |
JIS SMA400AW Mechanical Properties:
|
Min Yield Strength ( MPa ) |
Tensile Strength |
Elongation A% |
|||||
|
Thickness of plates and sections (mm) |
|
|
|||||
|
≤ 16 |
>16- ≤ 40 |
>40- ≤ 75 |
>75- ≤ 100 |
>100- ≤ 160 |
>160- ≤ 200 |
400-540 |
22 min |
JIS SMA400AW Application:
Mainly used for construction of tanks, containers, bridges, frame structures, vehicles, with the request of welded, bolted, etc.
JIS SMA400AW are the best products for the fabrication of agricultural vans and railway wagons, structures of bridges, water pipes, fans, chimney sand boilers.

