- : 0086-371-86151627 0086-371-86151827
- : 0086-371-86011881
- : [email protected]
- : [email protected]
- : bebonchina
- Boiler steels
- High carbon steel
- High Yield steel
- steel for welded tubes
- General construction steel
- steel with Cr.,Mo.,Cr-Mo
- Steel for large diameter pipes
- Simple pressure vessels steel
- Steel for gas cylinders and gas vessels
- General purpose structural steels
- Steel for boilers and pressure vessels
- steel resistant to atmospherical corrosion
- Carbon steel and low alloy steel
- Fine-grain structural steels,normalised rolled
- weldable normalized fine grained pressure vessel steels
- Rolling points of HP265 Steel
- Causes of Wrinkles on the Surface of
- Advantages of Controlled Rolling for
- The difference between A283 Gr C and
- Quality inspection of plate A285 gra
- A285 Gr.C plate for storage tanks
- The processing Technology of NM400 S
- Possible defects of 16Mo3 steel plat
- Acceptance criteria of Surface for 1
- Heat Treatment and Applications of A
Ultra-high strength 42CrMo steel plate data sheet
42CrMo steel is an ultra-high strength steel with high strength and toughness, good hardenability, no obvious temper brittleness, high fatigue limit and multiple impact resistance after quenching and tempering treatment, and good low temperature impact toughness. The 42CrMo steel is suitable for the manufacture of large and medium-sized plastic molds that require certain strength and toughness.
42CrMo steel plate chemical composition:
Carbon C: 0.38-0.45%;
Silicon Si: 0.17-0.37%;
Manganese Mn: 0.50-0.80%;
Sulfur S: allowable residual content ≤ 0.035%
Phosphorus P: allowable residual content≤0.035%;
Chromium Cr: 0.90-1.20%;
Nickel Ni: Allowable residual content ≤ 0.030%
Copper Cu: allowable residual content≤0.030%;
Molybdenum Mo:0.15-0.25%
42CrMo steel plate mechanical properties:
Tensile strength σb (MPa): ≥ 1080 (110)
Yield strength σs(MPa):≥930(95)
Elongation δ5(%):≥12
Area shrinkage ψ(%): ≥45
Impact energy Akv(J):≥63
Impact toughness valueαkv(J/cm2):≥78(8)
Hardness: ≤217HB
42CrMo steel equivalent grades: ISO grade: 42CrMo4; equivalent Japanese grade: SCM440, equivalent German grade: 42CrMo4 or 1.7225; equivalent to American grade: 4140 or G41400.