Contact us
- : 0086-371-86151627 0086-371-86151827
- : 0086-371-86011881
- : [email protected]
- : [email protected]
- : bebonchina
Products- Boiler steels
- High carbon steel
- High Yield steel
- steel for welded tubes
- General construction steel
- steel with Cr.,Mo.,Cr-Mo
- Steel for large diameter pipes
- Simple pressure vessels steel
- Steel for gas cylinders and gas vessels
- General purpose structural steels
- Steel for boilers and pressure vessels
- steel resistant to atmospherical corrosion
- Carbon steel and low alloy steel
- Fine-grain structural steels,normalised rolled
- weldable normalized fine grained pressure vessel steels
News- Rolling points of HP265 Steel
- Causes of Wrinkles on the Surface of
- Advantages of Controlled Rolling for
- The difference between A283 Gr C and
- Quality inspection of plate A285 gra
- A285 Gr.C plate for storage tanks
- The processing Technology of NM400 S
- Possible defects of 16Mo3 steel plat
- Acceptance criteria of Surface for 1
- Heat Treatment and Applications of A
European standard pressure vessel steel P355NH plate
P355NH European standard pressure vessel steel plate is a weldable fine grain steel. P355NH executive standard: EN10028. It belongs to low alloy high strength steel. P355NH plate is widely used in petroleum, chemical, power station, boiler and other industries.
P355NH pressure vessel steel plate chemical composition elements, melting analysis:
| C | Si | Mn | P | S | Ni | Cr | Mo | Cu | Nb | V | Ti | Alt | N |
| ≤0.18 | ≤0.5 | 1.1-1.7 | ≤0.025 | ≤0.015 | ≤0.5 | ≤0.3 | ≤0.08 | ≤0.3 | ≤0.05 | ≤0.1 | ≤0.03 | ≥0.02 | ≤0.012 |
Composition note: Nb+Ti+V≤0.12; Cr+Cu+Mo≤0.45. Ceq = C+Mn/6+(Cr+Mo+V)/5+(Ni+Cu)/15
P355NH steel longitudinal impact, mechanical properties:
P355NH plate delivery status: Normalized.
| Thickness | Mechanical properties | ||
| <5 | ReH(MPa) | ≥355 | |
| Rm(MPa) | 490-630 | ||
| A(%) | ≥22 | ||
| 5-16mm | ReH(MPa) | ≥355 | |
| Rm(MPa) | 490-630 | ||
| A(%) | ≥22 | ||
| Impact temperature | -20 | ||
| Akv(J) | ≥45 | Longitudinal; Transverse: Akv ≥ 30J | |
| >16-40 | ReH(MPa) | ≥345 | |
| Rm(MPa) | 490-630 | ||
| A(%) | ≥22 | ||
| Impact temperature | -20 | ||
| Akv(J) | ≥45 | Longitudinal; Transverse: Akv ≥ 30J | |
| >40-60 | ReH(MPa) | ≥335 | |
| Rm(MPa) | 490-630 | ||
| A(%) | ≥22 | ||
| Impact temperature | -20 | ||
| Akv(J) | ≥45 | Longitudinal; Transverse: Akv ≥ 30J | |
| >60-100 | ReH(MPa) | ≥315 | |
| Rm(MPa) | 470-610 | ||
| A(%) | ≥21 | ||
| Impact temperature | -20 | ||
| Akv(J) | ≥45 | Longitudinal; Transverse: Akv ≥ 30J | |
| >100-150 | ReH(MPa) | ≥305 | |
| Rm(MPa) | 460-600 | ||
| A(%) | ≥21 | ||
| Impact temperature | -20 | ||
| Akv(J) | ≥45 | Longitudinal; Transverse: Akv ≥ 30J | |
| >150-250 | ReH(MPa) | ≥295 | |
| Rm(MPa) | 450-590 | ||
| A(%) | ≥21 | ||
| Impact temperature | -20 | ||
| Akv(J) | ≥45 | Longitudinal; Transverse: Akv ≥ 30J | |
Tensile properties of P355NH plate:
The tensile strength range of P355NH steel plate is Rm630-450MPa. The yield strength is above 355-295MPa (less than or equal to 16 mm). The elongation after fracture is 21-22%.