- : 0086-371-86151627 0086-371-86151827
- : 0086-371-86011881
- : [email protected]
- : [email protected]
- : bebonchina
- Boiler steels
- High carbon steel
- High Yield steel
- steel for welded tubes
- General construction steel
- steel with Cr.,Mo.,Cr-Mo
- Steel for large diameter pipes
- Simple pressure vessels steel
- Steel for gas cylinders and gas vessels
- General purpose structural steels
- Steel for boilers and pressure vessels
- steel resistant to atmospherical corrosion
- Carbon steel and low alloy steel
- Fine-grain structural steels,normalised rolled
- weldable normalized fine grained pressure vessel steels
- Rolling points of HP265 Steel
- Causes of Wrinkles on the Surface of
- Advantages of Controlled Rolling for
- The difference between A283 Gr C and
- Quality inspection of plate A285 gra
- A285 Gr.C plate for storage tanks
- The processing Technology of NM400 S
- Possible defects of 16Mo3 steel plat
- Acceptance criteria of Surface for 1
- Heat Treatment and Applications of A
European standard S235JR S235J0 S235J2 carbon steel plate
S235JR S235J0 S235J2, all of these grades belong to the European standard carbon steel, and follow the European standard EN10025-2. The thickness that can be produced is 8-150mm, the width is 1600-3000mm, and the length is 6000-15000mm.
If there are no special technical requirements, S235JR S235J0 S235J2 carbon steel plates are usually delivered in hot-rolled condition.
The main chemical composition range of European standard S235JR S235J0 S235J2 carbon steel plates is:
C %: 0.17-0.19
Mn %: 0.14-0.15
P %: 0.035-0.045
S %: 0.035-0.045
N %: 0.012-0.14
Cu %: 0.40-0.45
There are similarities between European standard S235JR S235J0 S235J2 carbon steel plate and domestic standard plate,
S235JR: R represents room temperature impact.
S235J0: 0 represents zero degree impact.
S235J2: 2 represents a minus 20 impact.
The suffix after only represents the difference in impact temperature.