- : 0086-371-86151627 0086-371-86151827
- : 0086-371-86011881
- : [email protected]
- : [email protected]
- : bebonchina
- Boiler steels
- High carbon steel
- High Yield steel
- steel for welded tubes
- General construction steel
- steel with Cr.,Mo.,Cr-Mo
- Steel for large diameter pipes
- Simple pressure vessels steel
- Steel for gas cylinders and gas vessels
- General purpose structural steels
- Steel for boilers and pressure vessels
- steel resistant to atmospherical corrosion
- Carbon steel and low alloy steel
- Fine-grain structural steels,normalised rolled
- weldable normalized fine grained pressure vessel steels
- Rolling points of HP265 Steel
- Causes of Wrinkles on the Surface of
- Advantages of Controlled Rolling for
- The difference between A283 Gr C and
- Quality inspection of plate A285 gra
- A285 Gr.C plate for storage tanks
- The processing Technology of NM400 S
- Possible defects of 16Mo3 steel plat
- Acceptance criteria of Surface for 1
- Heat Treatment and Applications of A
Introduction and Application of X70 Pipeline Steel
Main properties of X70 pipeline steel
X70 pipeline steel has high strength, high toughness, good weldability, certain resistance to HIC and SSC, and the improvement of pipeline steel grade can save construction costs.
Delivery status of X70 pipeline steel
X70 pipeline steel is mainly supplied in hot rolled or normalized state and implement API 5L-2012 standard, GB national standard, special standards for various projects.
Analysis of chemical composition of X70 pipeline steel
Early pipeline steels always used ordinary carbon steels of C, Mn, and Si types, which focused on performance in metallurgy and did not have strict regulations on chemical composition. Since the 1960s, with the increase in the pressure and diameter of oil and gas pipelines, low-alloy high-strength steel (HSLA) has been adopted.
Chemical composition of X70 pipeline steel:
Grade | C | Si | Mn | P | S | V+Nb+Ti |
X70 pipeline steel | ≤0.12 | ≤0.45 | ≤;1.70 | ≤0.025 | ≤0.015 | ≤0.15 |
Attachment: Cu≤0.50%; Ni≤0.50%; Cr≤0.50%; Mo≤0.50%; B≤0.001%
Mechanical properties of X70 pipeline steel:
Grade |
Yield strength MPa |
Tensile strength MPa |
Yield strength ratio |
X70 pipeline steel |
485-635 |
570-760 |
≥0.93 |
Practical application of X70 pipeline steel: X70 pipeline steel is mainly used in oil and gas pipelines.