- : 0086-371-86151627 0086-371-86151827
- : 0086-371-86011881
- : [email protected]
- : [email protected]
- : bebonchina
- Boiler steels
- High carbon steel
- High Yield steel
- steel for welded tubes
- General construction steel
- steel with Cr.,Mo.,Cr-Mo
- Steel for large diameter pipes
- Simple pressure vessels steel
- Steel for gas cylinders and gas vessels
- General purpose structural steels
- Steel for boilers and pressure vessels
- steel resistant to atmospherical corrosion
- Carbon steel and low alloy steel
- Fine-grain structural steels,normalised rolled
- weldable normalized fine grained pressure vessel steels
- Rolling points of HP265 Steel
- Causes of Wrinkles on the Surface of
- Advantages of Controlled Rolling for
- The difference between A283 Gr C and
- Quality inspection of plate A285 gra
- A285 Gr.C plate for storage tanks
- The processing Technology of NM400 S
- Possible defects of 16Mo3 steel plat
- Acceptance criteria of Surface for 1
- Heat Treatment and Applications of A
EN10111 standard DD14 steel,main chemical composition of DD14 steel grade
EN10111 standard DD14 steel,main chemical composition of DD14 steel grade
Hot sell EN10111 standard DD14 steel in China,as a steel grade exporter in China,we can offer main chemical composition of DD14 steel grade and DD14 steel stock.
DD14 steel Specification:
1)Width:20mm-2500mm
2)Thick:1.5-20mm
3) DD14
D14 steel which is under EN10111 standard is stamping and cold forming steel. DD14 steel is suitable for non-structural presswork and forming.
DD14 steel main chemical composition: Carbon: max 0.08, Manganese max 0.35, Sulphur max 0.025, Phosphorus max 0.025. More detailed information, please refer to the flowing table:
DD14 steel main chemical composition:
Chemical elements |
C |
Si max |
Mn max |
P max. |
S max. |
DD14 |
0.08 |
-- |
0.35 |
0.025 |
0.025 |
DD14 steel Mechanical Property:
thickness |
Yield Strength ReH [N/mm2] transv.min. |
Tensile Strength Rm [N/mm2] transv. |
Fracture Elongation[%]transv. min. |
Bending Test transv.bending mandrel Ø angle = 180° s = plate thickness |
t≤ 16mm t >16mm |
170-3290 |
|
|
0 S |
t < 3mm t ≥ 3mm |
|
380 |
|
|
Up to 1.5mm 1.51-2.00mm 2.01-2.50mm 2.51-2.99mm ≥ 3mm |
|
|
31 A80 32 A80 36 A5 |
We have A large amount of EN10111 standard DD14 steel ex-stock, detailed chemical composition and mechanical property information, cheap price and so on, these are Bebon Steel can service of EN10111 standard DD14 steel for you. Welcome to contact us!